beautypg.com

Brake-shift interlock – floor-shift transmission, Driving – FORD 2010 Expedition v.3 User Manual

Page 303

background image

3. Remove the access plug on top of
the steering column.

4. Using a flat-head screwdriver or
similar tool, move the brake-shift
interlock actuator spindle toward
the left, apply the brake, place the
key in the on position and shift the
transmission into N (Neutral).

5. Start the vehicle.

6. Reinstall the access plug.

WARNING: Do not drive your vehicle until you verify that the
brakelamps are working.

WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer.

Brake-shift interlock – floor-shift transmission

This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.

If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has

Driving

303

2010 Expedition (exd)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: