Resuming a set speed, Increasing speed while using speed control, Reducing speed while using speed control – FORD 2010 Expedition v.3 User Manual
Page 139: Driver controls
Resuming a set speed
Press the RES (resume) control and
release it. This will automatically
return the vehicle to the previously
set speed.
Increasing speed while using speed control
There are two ways to set a higher
speed:
• Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the tap-up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1 mph
(2 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.
Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the SET - control
until you get to the desired
speed, then release the control.
You can also use the SET -
control to operate the tap-down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by
1 mph (2 km/h).
• Press the brake pedal until the desired vehicle speed is reached, press
the SET + control.
Driver Controls
139
2010 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)