FORD 2010 Expedition v.3 - Manual (Page 108)

14. OFF: Outside air is shut out and the climate system is turned off.
15. Driver temperature control: Press to increase or decrease the
temperature on the driver side of the cabin. Sets the passenger side
temperature also when DUAL is disengaged. Note: The recommended
vehicle cabin setting is between 72°F (22°C) and 75°F (24°C).
• Dual temperature control: Press and hold AUTO to
engage/disengage separate passenger side temperature control.
16. AUTO: Press to engage full automatic operation, and select the
desired temperature using the temperature control. The system will
automatically determine fan speed, airflow location, A/C on or off, and
outside or recirculated air, to heat or cool the vehicle to reach the
desired temperature.
17. EXT: Press to display the outside temperature. Press again to display
the cabin temperature settings. Note: Exterior readings are more
accurate when the vehicle is moving.
18. REAR: Press to enable the control located in the rear of the floor
console. Press again to turn the auxiliary system off. When the REAR
button is pressed, the display will show only the rear cabin settings.
After the rear setting changes are completed on the front control, the
display will automatically show all climate settings.
Dual automatic temperature control with heated and cooled seats
and rear passenger compartment climate control (if equipped)
Climate Controls
108
2010 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)