beautypg.com

Replacing license plate lamp bulb, Lights – FORD 2010 Expedition v.3 User Manual

Page 124

background image

Replacing license plate lamp bulb

The license plate bulbs are located in the license plate housing assembly
on the liftgate. To change the license plate bulbs:

1. Make sure the headlamp switch is
in the off position.

2. Remove the license lamp screw
from the assembly.

3. Pull the lamp down and twist the
bulb socket counterclockwise.
Remove the bulb socket from the
lamp.

4. Pull out the old bulb and push in
the new bulb.

5. Install the bulb socket in the lamp assembly by turning it clockwise.

6. Install the lamp assembly and secure it with the retaining screw.

Replacing approach lamp/mirror turn signal bulbs (if equipped)

For bulb replacement, see your authorized dealer.

Lights

124

2010 Expedition (exd)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: