Locks and security – FORD 2011 Explorer v.3 User Manual
Page 134
Condition
Potential Causes
Lost any key
• For programming spare keys, refer to the
Programming spare keys section in this
chapter.
I accidentally programmed
all keys as MyKeys
• Vehicle has a non Ford-approved remote
start system that is recognized as an admin
key. Refer to the Using MyKey
with
remote start systems section to reset all
MyKeys
as admin keys.
No MyKey
function
• An admin intelligent access key is present
at a push-and-start vehicle.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a non
Ford-approved remote start system (as an
admin key) then a MyKey
is inserted
without restarting the engine.
MyKey
programmed total
includes one additional key
• Unknown key has been programmed to
the vehicle as a MyKey
.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey
with remote start systems
section.
Admin keys programmed
total includes one additional
key
• Unknown key has been programmed to
the vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey
with remote start systems
section.
MyKey
distance does not
accumulate
• MyKey is not being used by the intended
user.
• MyKey system has been recently cleared.
• Vehicles has been remote started using a
non Ford-approved remote start system (as
if an admin key) then a MyKey
is inserted
without recycling the MyKey
in ignition.
Locks and Security
134
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)