FORD 2013 Taurus v.1 - Manual (Page 93)

Activating the system
Switch the system on within the information display. See Information
displays.
Turn the lighting control to the
autolamps position.
Manually overriding the system
When the automatic control has
activated high beams, pushing or
pulling the stalk will provide a
temporary override to low beam.
To permanently deactivate the system use the information display menu
or turn the lighting control switch from autolamps to headlamps.
DIRECTION INDICATORS
• Push down to activate the left
turn signal.
• Push up to activate the right turn
signal.
Note: Tap the lever up or down to make the direction indicators flash
only three times to indicate a lane change.
Lighting 93
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)