Using advancetrac, Stability control 209 – FORD 2013 Taurus v.1 User Manual
Page 209

USING ADVANCETRAC
ா
The system automatically is enabled when you start your engine. The
ESC portion of the system is disabled when the transmission is in R
(Reverse) or, on SHO models, if the AdvanceTrac
switch is pressed and
held for more than five seconds when the brakes are applied and the
vehicle is at a stop. The traction control portion of the system can be
turned off independently. See the Traction Control chapter.
AdvanceTrac
Features
Button
functions
Mode
icon
status
ESC
TCS
Default at
start-up
—
On during
bulb
check
Enabled
Enabled
Button pressed
momentarily
Traction
control off
On
Enabled
Disabled
Button pressed
twice; brakes
applied
Sport mode
(SHO with
performance
pack only)
On
Enabled
Enabled
Button pressed
and held more
than 5 seconds;
brakes applied;
no throttle
AdvanceTrac
Disabled
(SHO with
performance
pack only)
On
Disabled
Disabled
Button pressed
again after
deactivation
AdvanceTrac
fully enabled
Off
Enabled
Enabled
The SHO model is equipped with a sport mode which allows the driver to
reduce normal AdvanceTrac
system intervention and provide a more
spirited driving experience. To enter sport mode, press the stability
control button twice rapidly with the brakes applied. The message
appears in the information display that the system is now in sport mode.
Note: Sport mode is not intended to be used on public roadways.
Stability Control
209
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)