FORD 2013 Taurus v.1 - Manual (Page 161)

MEMORY FUNCTION (if equipped)
The memory control, located on the side seat panel, allows positioning
recall of the:
• Driver seat
• Power mirrors
• Adjustable pedals (if equipped)
• Power tilt/telescopic steering column (if equipped)
A. Type 1
B. Type 2
Programming a memory position
Note: A memory position may be programmed at any time.
• To program a position, move the memory features to the desired
positions using the associated controls. Press and hold the desired
memory button for at least two seconds. A chime will sound
confirming that a memory position has been set.
• To program another position, repeat the previous procedure using the
other buttons.
Recalling a memory position
A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in P (Park) or N (Neutral) if the ignition is on.
Press the desired memory control to recall a memory position.
Recalling a memory position with the remote control
The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position)
or, when you enter a valid personal entry code that is programmed to a
A B
Seats 161
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)