Replacing tail/brake lamp bulbs, Replacing the license plate lamp bulb, Replacing high-mount brake lamp bulb – FORD 2013 Explorer v.2 User Manual
Page 347: Bulb specification chart, Maintenance 347
6. Pull bulb straight out of socket.
7. Install the new bulb in reverse order.
Carefully install the tail lamp assembly on the vehicle by securing the
lamp assembly with two bolts. Reinstall bolt covers.
Replacing tail/brake lamp bulbs
For bulb replacement, see your authorized dealer.
Replacing the License Plate Lamp Bulb
1. Carefully release the spring clip.
2. Remove the lamp.
3. Remove the bulb.
Install the new bulb in reverse
order.
Replacing high-mount brake lamp bulb
Your vehicle is equipped with an LED center high-mount stop lamp
located in the spoiler. It is designed to last the life of the vehicle. If
replacement is required, see your authorized dealer.
BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. Using incorrect bulbs may damage the lamp assembly
or void the lamp assembly warranty or may not provide quality bulb burn
time.
Function
Number of bulbs
Trade number
Low/high beam
headlamp
2
HB3
* HID headlamp
2
D3S
Front park/turn lamp
2
3457K
Sidemarker
2
W5W
* Tail lamp
n/a
LED
Backup lamp
2
W21W
3
2
1
Maintenance
347
2013 Explorer (exp)
Owners Guide gf, 2nd Printing
USA (fus)