Canon A710 IS - Manual (Page 95)

93
Trou
blesh
oo
tin
g
Subject in recorded image is too dark.
Insufficient light for shooting. z Set the flash to (Flash on)
(Basic Guide p. 12).
The subject is
underexposed because the
surroundings are too bright. z Set the exposure compensation to
a positive (+) setting
(p. 51) .
z Use the AE lock or spot metering
functions
(pp. 48 , 50) .
Subject is too far away for
flash to reach. z Shoot within correct shooting
distance of the subject when using
the built-in flash
(p. 120) .
z Raise the ISO speed and then
shoot
(p. 62) .
Subject in recorded image is too bright, or
image flashes white.
Subject is too close, making
the flash too strong. z Shoot within correct shooting
distance of the subject when using
the built-in flash
(p. 120) .
The subject is overexposed
because the surroundings
are too dark. z Set the exposure compensation to a
negative (–) setting
(p. 51) .
z Use the AE lock or spot metering
functions
(pp. 48 , 50) .
Too much light is shining
directly into the camera, or
is being reflected off the
subject. z Change the shooting angle.
Flash is set to on. z Set the flash to (Flash off)
(Basic Guide p. 12).