Adjusting the tone (white balance), P. 52), P. 52 – Canon A710 IS User Manual
Page 54
52
To Cancel the Exposure Compensation
Follow procedure 2 to restore the compensation value to [0].
* Cannot be set in
and
modes.
Normally, the
(Auto) white balance setting selects an optimal
white balance. When the
(Auto) setting cannot produce natural
looking colors, change the white balance using a setting
appropriate for the light source.
2
Press the button several times until the
exposure compensation bar is displayed.
z
Use the
or
buttons to adjust the
exposure compensation and press the
button.
z
Depending on the shooting mode,
pressing the
button will switch
between the setting items as follows:
Adjusting the Tone (White Balance)
Shooting Mode
1
FUNC. Menu
* (Auto).
See Menus and Settings
* Default setting.
z
Use the
or
button to select a
white balance setting and press the
FUNC./SET button.
* The AF frame can only be selected when [AF frame] is set to
mode/Exposure compensation
Shooting direction selection/Exposure compensation
Shutter speed/Exposure compensation/AF frame*
Aperture value/Exposure compensation/AF frame*
Exposure compensation/AF frame*
*