Canon A710 IS - Manual (Page 46)

44
* Cannot be set in and modes.
The AF frame indicates the area of the composition on which the
camera focuses. You can set the AF frame in the following ways.
Selecting an AF Frame
Shooting Mode
AiAF
The camera automatically selects between
9 AF frames to focus on according to the
shooting conditions.
Center
The camera focuses using the center AF
frame. This is convenient for making sure
the focus is exactly where you want it.
FlexiZone
(Manual
setting)
Mode dial: / / /
You can move the AF frame manually to
the desired position. This is convenient for
focusing accurately on your chosen subject
to obtain the composition you desire.
1
(Rec.) Menu [AF Frame] [AiAF]*/
[Center]/[FlexiZone].
See Menus and Settings (p. 19) .
* Default setting.
z When [FlexiZone] is selected (p. 45) .
z [FlexiZone] cannot be selected when the LCD monitor is off.
z The AF frame appears as follows (when the LCD monitor is
on) when the shutter button is pressed halfway.
*
(Desired position)
• Green : Shooting preparations complete
• Yellow : Focusing difficulty*
* It will not be displayed when the AF frame is set to [AiAF].