BMW 645Ci Coupe 2004 - Manual (Page 86)

Technology for comfort, convenience and safety
84
6. Press the controller.
The information appears on the
Head-Up Display.
Depending on which key you have used to
open the vehicle, the last adjustment is
applied.
Adjusting brightness
The brightness of the display is automati-
cally adapted to the ambient lighting condi-
tions. However, you can change the base
setting.
With the low beams switched on, the
brightness can also be adjusted with the
serrated dial of the instrument lighting.
Control Center, for principle details, refer to
page
16 :
1. Open the menu
2. Select "Display settings" and press the
controller
3. Select "Brightness" and press the con-
troller
4. If necessary, move the controller to the
left to select "Head-Up Display Offset"
5. Turn the controller until the desired set-
ting is selected.
Depending on which key you have used to
open the vehicle, the last adjustment is
applied.
Notes
The recognizability of the displays in the
Head-Up Display is influenced by:
> Sunglasses with certain polarization
filters
> Certain seating positions
> Objects on the cover of the Head-Up
Display
> Wet road surface and unfavorable light-
ing conditions.
If the image is distorted, please have the
base setting checked at a BMW center.
Special windshield
The windshield is part of the system. The
shape of the windshield complies with the
requirements of the Head-Up Display to
enable a precise display. A film in the wind-
shield prevents the double images from
being displayed.
To have the windshield replaced, contact a
BMW center.
Care instructions
You can find everything you need to know
on this topic by consulting the Caring for
your vehicle brochure.
Only clean the cover of the Head-Up
Display with a soft, non-abrasive cloth
or a display cleaning cloth, as otherwise
damage may result.
<
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG