Front head restraints – BMW 645Ci Coupe 2004 User Manual
Page 47
45
Safety feature
1.
Close the driver's door and turn the
ignition key to position 0 or 2
2.
Press the desired memory button 1, 2
or 3 and maintain pressure until the
adjustment process has been com-
pleted.
If you press the
M
EMORY button acciden-
tally:
Press the button again; the indicator lamp
goes out.
Tilt function, passenger-side mirror
Automatic curb monitor
Activating
1.
Select the driver's exterior mirror with
the switch
2.
When you engage reverse gear or
selector-lever position R, the exterior
mirror glass on the front passenger side
tilts downward slightly. This allows the
driver to see the area immediately adja-
cent to the vehicle – such as a curb –
when parking, etc.
Deactivating
Slide the mirror selection switch to the pas-
senger's side position.
Front head restraints
Head restraints reduce the risk of spi-
nal injury in the event of an accident.
Adjust the head restraints so that they are
centered roughly at the level of your ears.
<
Coupe
Adjusting the height
>
To raise: pull
>
To lower: press.
To reach the lowest position, press
the button, refer to arrow 1.
<
Adjusting tilt angle
Swivel the head restraints.
Removal
1.
Pull the head restraint upwards to the
stop
2.
Press the button, arrow 1, and remove
the head restraint.
Installation
Push the head restraint into the supports.
Convertible
Adjusting height
>
To raise: move the switch upwards
>
To lower: move the switch downwards.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG