BMW 645Ci Coupe 2004 - Manual (Page 68)

Everything under control
66
Symbols
The service deadline has already
passed.
The deadline for service or an official
inspection is approaching. Please fix
a service appointment.
No service is currently required.
You can request more detailed information
on every entry.
Select the entry and press the controller.
To exit the menu:
Select
and press the controller.
Entering dates for state emission and
vehicle inspections
Make sure the date in the Control Center is
always set correctly, refer to page
73 , as
otherwise the effectiveness of CBS Condi-
tion Based Service is not ensured.
Control Center, for principle details, refer to
page
16 :
1. Open the menu
2. Select "Service" and press the control-
ler
3. Select "Service requirements" and
press the controller
4. Select "Status" and press the controller
5. Select "Emission inspect." or "State
inspection" and press the controller
6. Select "Set service date" and press the
controller. The month is highlighted
7. Turn the controller to make the adjust-
ment
8. Press the controller to apply the setting.
The year is highlighted
9. Turn the controller to make the adjust-
ment
10. Press the controller to apply the setting.
The date entry is stored.
To exit the menu:
Select
and press the controller.
Check Control
The concept
The Check Control monitors functions in
the vehicle and issues a message if there is
a malfunction in the monitored systems.
Supplementary messages on the Control
Display are intended to assist you in
assessing the severity of malfunctions; they
provide you with the information you need
to decide on the best way to respond.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG