BMW 645Ci Coupe 2004 User Manual
Page 189
187
>
When mounted at an angle, the tow bar
will exert lateral forces, tending to push
the vehicle sideways.
Secure the tow bar on the tow fitting
only. Otherwise damage could result
on other vehicle parts.
<
With tow-rope
When starting off in the towing vehicle,
make sure that the tow-rope is taut.
To avoid jerking and the associated
stresses on vehicle components
when towing, always use nylon ropes or
nylon straps. Secure the tow rope on the
tow fitting only. Otherwise damage could
result on other vehicle parts.
<
With tow truck
Have the BMW transported with a tow
truck with a so-called lift bar or on a load
bed.
Do not lift vehicle by tow fitting or
body and chassis parts, as otherwise
damage may result.
<
Tow-starting
Do not tow-start vehicles with an
automatic transmission.
<
Only tow-start vehicles with a catalytic
converter with the engine cold. It is better
to jump-start the engine, refer to page
.
1.
Switch on the hazard warning flashers,
comply with country-specific regula-
tions
2.
Turn the ignition key to position 2
3.
Engage the 3rd gear, vehicles with
SMG, see below
4.
Have the vehicle tow-started with the
clutch pedal completely depressed and
slowly release the clutch. After the
engine starts, depress the clutch pedal
completely again
5.
Stop at a suitable location, remove the
tow bar or rope and switch off the haz-
ard warning flashers
6.
Have the vehicle checked.
Vehicles with SMG Sequential manual
transmission:
1.
Tow-start in selector lever position N
2.
Select sequential mode. The correct
gear will be selected and engaged
automatically.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG