Safety belts, Heated seats – BMW 645Ci Coupe 2004 User Manual

Page 49

Safety belts

Fasten your safety belt before starting any
trip. Airbags complement the safety belt as
an additional safety device, but they do not
represent a substitute.

Fastening

Make sure you hear the latch plate engage
in the belt buckle.

Please fasten safety belt
warning lamp:
Lights up until the driver and front

passenger have fastened their safety belts.
Depending on the model, a signal

sounds

or a message

appears on the Control Dis-

play at the same time.
The warning is also issued when the driver
or front passenger removes his or her
safety belt while driving.

The warning can also take place if
objects are placed on the passenger

seat.

Releasing

Hold the belt firmly

Press the red button in the belt buckle

Guide the belt into its reel.

The shoulder strap's anchorage point will
be in the correct position for adults of every
build if the seat is correctly adjusted, refer
to page

Damage to safety belts

If the safety belts are damaged or
stretched in an accident: have the

entire belt system, including the tensioning
mechanisms, replaced at your BMW cen-
ter. Have the belt anchorage points
inspected for damage at the same time.
Failure to observe this precaution may pre-
vent the safety belts from effectively pro-
viding optimal protection when needed.

Heated seats

The system regulates the temperatures of
the seat cushion and backrest.

The temperature setting progresses one
step through its control sequence each
time you press the button.

To switch off:
Maintain pressure on the button for several
seconds.

This manual is related to the following products:

645Ci Convertible 2004