BMW 645Ci Coupe 2004 - Manual (Page 70)

Everything under control
68
Calling up stored messages on
Control Display
Using CHECK button
1. Press the button longer:
The first stored message is displayed
2. Briefly press the button:
A new message appears each time you
briefly press the button.
Using Control Center
Control Center, for principle details, refer to
page
16 :
1. Press button.
The start menu is opened
2. Press the controller to open the menu
3. Select "Service" and press the control-
ler
4. Select "Check Control messages" and
press the controller. The stored mes-
sages appear on the display
5. Select the desired message and press
the controller.
The display disappears automatically after
a short time.
To exit the menu immediately:
Select
and press the controller.
Displays after completion of trip
Malfunction reports generated during the
trip are shown consecutively when you
switch off the ignition.
Before the display disappears, you can dis-
play the messages once again. Press the
CHECK button for approx. 2 seconds.
If several messages are present, you can
continue to briefly press the CHECK button
to view them in succession.
The display
> cancels itself automatically after a brief
period
> can be canceled by again pressing the
CHECK button for approx. 2 seconds.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG