BMW 330i Sedan 2005 - Manual (Page 77)

Everything under control
76
4. Select "Stopwatch" and press the control-
ler.
Starting, stopping or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and restarts if it was
running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an interim time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
is running. The stopwatch continues operation
in the background.
<
Altering settings
Language on the Control Display
The language on the Control Display can be set,
refer to the concept on page
16 . The setting is
stored for the remote control currently in use.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
4. Select "Languages" and press the control-
ler.
5. Select "Text language" and press the con-
troller. You can switch to another language
for the display texts and navigation mes-
sages.
6. Select and activate the desired language by
pressing the controller.
Brightness of the Control Display
The brightness is automatically adapted to the
ambient lighting conditions. Note, however,
that you can change the basic setting while the
low beams are switched on. The setting is
stored for the remote control currently in use.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
4. Select "Brightness" and press the control-
ler.
5. Turn the controller until the desired setting
is selected.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG