BMW 330i Sedan 2005 - Manual (Page 69)

Everything under control
68
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 65
3 When the lights are switched on: instrument
lighting brightness 87
4 Calling up Check Control 73
5 Checking oil level 181
6 Setting the time 71
7 Date setting 72
8 Viewing service requirement display 69
Exiting displays
The outside-temperature reading and the time
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page
29 .
> Fuel consumption: mpg US, mpg UK,
l/100 km, km/l
> Distance covered: mls, km
> Units of pressure * : psi, kPa, bar
> Temperature: 7, 6
Changing units of measure
iDrive concept, refer to page 16 .
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
4. Select "Units" and press the controller.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG