BMW 330i Sedan 2005 - Manual (Page 76)

Co
n
tr
o
ls
75
Refere
nce
At a glan
ce
Dr
ivi
n
g ti
ps
Communication
s
Navigation
Ente
rt
ai
nme
n
t
M
o
bi
lity
3. Lightly push button 1 to check for other
messages.
4. Press button 2.
The display again shows the outside tem-
perature and the time.
Viewing more information later
iDrive concept, refer to page 16 .
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Service" and press the controller.
4. Select "Check Control messages" and
press the controller.
5. Select a text message and press the con-
troller.
To exit the display:
Select the
arrow and press the controller.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
Displaying, setting or changing the
limit
iDrive concept, refer to page 16 .
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Limit" and press the controller.
5. Depending on your vehicle's equipment
version, select "Change limit:" or the speed
value and press the controller.
6. Turn the controller to set the limit.
7. Press the controller to apply the setting.
The limit is automatically switched on.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating the limit
Select "On" and press the controller.
Limit is activated.
Stopwatch
iDrive concept, refer to page 16 .
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG