Sequential manual transmission with drivelogic, E set, Driving – BMW M6 Coupe 2006 User Manual

Page 54

Driving

Indicator lamp

The indicator lamp lights up, and a sig-
nal also sounds when starting off. The
handbrake is engaged.
Indicator lamp for Canadian models.

Engaging

The lever engages automatically.

Releasing

Pull slightly upwards, press the button and
lower the lever.

If exceptional circumstances should
make it necessary to engage the hand-

brake while the vehicle is in motion, do not pull
it too strongly. In doing so, continuously press
the button of the handbrake lever. Otherwise,
excessive pressure can lead to the rear wheels
locking up and loss of traction – fishtailing – at
the rear axle.

To prevent corrosion and one-sided brak-
ing action, occasionally apply the hand-

brake lightly when the vehicle is slowly coming
to a stop if the traffic conditions are suitable.
The brake lamps do not light up when the hand-
brake is engaged.

Sequential Manual

Transmission with Drivelogic

The concept

The SMG Sequential Manual Transmission
with Drivelogic is an automated manual trans-

mission in which an electrohydraulic system
handles the clutching and gear changes.
The Sequential Manual Transmission is oper-
ated with the selector lever and two shift pad-
dles on the steering wheel.
It offers the following functions:

Choice of manual or automatic mode:
Sequential mode or Drive mode

Selection option between different driving
programs, Drivelogic, refer to page

Upshift display, shift lights, refer to page

Automatic downshifting and prevention of
incorrect shifting even in sequential opera-
tion

Automatic double clutching

Selector lever positions

R: Reverse gear

N: Neutral, idle

Β: Drive position:

+: manual upshifting

–: manual downshifting

D/S: switch between Drive mode and
Sequential mode

Shiftlock

Press the brake pedal before shifting out of N;
the shift command will not be executed unless
the brake is applied.

R Reverse

Select only when the vehicle is stationary.