BMW M6 Coupe 2006 User Manual

Page 159

157

Voice commands

Activating system

Press the

button on the steering wheel.

An acoustic signal indicates that you can
say commands.

Say the command.
The text or numbers that the voice com-
mand system has registered will appear on
the Control Display.

Ending/canceling operation by voice

Press the

button on the steering wheel

In dialogs where text is spoken, not a command,
e.g. a name, canceling is only possible using the
button on the steering wheel.

Having possible commands read aloud

The system understands default commands
that must be spoken word for word.
You can have the system read aloud the possi-
ble commands at any point:

Using alternative commands

There are often a number of commands to run a
function, e.g.:

The system recognizes digits from zero to nine.
You can say each digit individually or group
them into a sequence to accelerate the input.

Example: dialing phone numbers

Start the dialog:
Press the

button on the steering wheel.

Adjusting volume

You can adjust the volume for the instructions
from the system:

Turn the button during an instruction to select
the desired volume.

This volume for the instructions is maintained,
even if the other audio sources are set to mini-
mum volume.
The setting is stored for the remote control cur-
rently in use.

{Cancel}.

{Help}

{Dial name} or {Name}.

Command

Response

{Dial number}

e.g.

{123 456 7890}

Depending on equipment:
{{123 456 7890. Continue?}} or
{{123 456 7890. And next?}}

{Dial}