Seat, mirror and steering wheel memory – BMW 525xi Sedan 2006 User Manual
Page 49
47
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.
>
Increase or decrease curvature: push
switch forward or back.
>
Shift curvature up or down: push switch up
or down.
Adjusting active backrest width*
First set a comfortable backrest width, see
above. Based on the backrest width set, the lat-
eral support is automatically adapted to the cur-
rent driving situation.
The adaptation of the backrest width and the
speed of the adjustment vary depending on the
program. You can select from among three pro-
grams from comfort to sport.
Press program button once:
>
"Comfort" program: one LED
>
"Normal" program: two LEDs
>
"Sport" program: three LEDs
To switch off: press button longer.
Easy entry/exit*
To facilitate entry and exit, the backrest width
temporarily opens all the way.
Seat, mirror and steering
wheel memory*
You can store and request two different posi-
tions for the driver's seat and passenger seat
*
,
external rearview mirrors, and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page
2.
Set the desired seat, exterior mirror and
steering wheel positions.
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
<
Convenience mode
1.
Open the driver's door after unlocking or
switch on radio readiness.
2.
Briefly press the desired memory button
1
or
2.
The system immediately cancels the
adjustment procedure when you briefly
press one of the seat adjustment buttons or
one of the memory buttons.
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG