BMW 525xi Sedan 2006 - Manual (Page 101)

Co
n
tr
o
ls
99
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
> in dense fog, heavy rain or snowfall
> when displaying very hot objects such as
transformers, car exhausts etc.
> when the image briefly freezes during nor-
mal system adjustment.
BMW Night Vision's potential benefits
can be limited by the driving style of the
driver, the size and relative temperature of the
detected objects, dirt or contamination on the
camera lens, adverse weather like snow, rain or
fog, and other factors not mentioned here. It will
always be the driver's responsibility to drive at a
speed and in a manner that recognizes potential
hazards and adjust accordingly.
BMW Night Vision is not a substitute or replace-
ment for driver responsibility or for accommo-
dating the visibility conditions and the traffic sit-
uation. The forward view illuminated by the
headlamps must always be the basis for making
safe driving decisions, otherwise a safety risk
will result.
<
Activating BMW Night Vision
1. Turn the light switch to position 2 or 3, refer
to page 101 .
2. With low beams switched on:
> Press the button. Depending on the
vehicle's equipment, the location of the
button may differ somewhat.
> Press one of the programmable buttons
on the steering wheel, refer to page
53 .
The image will be displayed on the Control Dis-
play after a few seconds. Depending on the last
mode selected, either the normal or full screen
image will be displayed.
Due to the system's need to adjust periodically,
a still image is displayed at certain intervals for
fractions of a second. This is normal and not an
indication of a problem.
To prevent driving without headlamps, at a
speed of more than approx. 3 mph/5 km/h and
when dark, the thermal image on the Control
Display is only shown when the low beams are
on.
Deactivating BMW Night Vision
> Press the button.
> Press the button on the steering wheel.
> Press the button.
> Via iDrive", refer to Selecting settings.
Selecting settings
iDrive, for explanation of principle, refer to
page
16 .
1. Activate BMW Night Vision.
2. Press the controller to display the menu
items.
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG