beautypg.com

Opening and closing – BMW 525xi Sedan 2006 User Manual

Page 44

background image

Opening and

closing

42

>

The opened glass sunroof automatically
moves into the raised position. The sliding
visor remains completely open.

Do not use force to close the headliner
insert with the glass sunroof in its raised

position, otherwise the mechanism will be dam-
aged.

<

Opening, closing

>

Press switch back to the resistance point.
The glass sunroof and the sliding visor open
together for as long as you hold the switch
in this position.

>

Press switch back past the resistance point.
The glass sunroof and the sliding visor open
automatically. Briefly press the switch again
to stop the opening movement.

In a similar manner, the glass sunroof closes
when you slide the switch forward. The sliding
visor remains open and can be closed by hand.
For information on using the convenience oper-
ation at the door lock or with the remote control,
refer to page

31

or

32

.

For information on comfort closing with comfort
access, refer to page

39

.

Automatic opening and closing

Press the switch past the resistance point.
The following movements are also automatic:

>

When the sunroof is open, press the switch
in the lifting direction: the sunroof is raised
all the way.

>

When the sunroof is raised, press the
switch in the opening direction: the sunroof
is opened all the way.

Pressing the switch again stops the motion.

Pinch protection system

If the glass sunroof encounters resistance when
closing from roughly the center of the roof
opening or when closing from the raised posi-
tion, the closing action is interrupted and the
glass sunroof reopens a short way.

Despite the pinch protection system,
inspect the sunroof's travel path prior to

closing it, as the safety system might fail to
detect certain kinds of obstructions, such as
very thin objects, and the sunroof would con-
tinue closing.
Pressing the switch beyond the resistance
point and holding it there deactivates the pinch
protection system.

<

Following interruptions in electrical

power supply

After a power loss, the sunroof may only
respond to the lift command. The system must
be initialized. BMW recommends having this
work done by your BMW center.

Moving manually

In the event of an electrical malfunction, you can
move the glass sunroof manually:

1.

Fold the cover panel down, if necessary
using a screwdriver from the onboard tool
kit, refer to page

211

.

2.

Insert the Allen wrench supplied with the
onboard tool kit, refer to page

211

, into the

opening provided. Move the glass sunroof
in the desired direction. The arrow below
indicates the rotation direction for closing.

Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG