BMW M6 Convertible 2008 User Manual

Page 86

nolo

r co

mfort

, c

nve

e an

Select "M Dynamic Mode" and press the
controller.

You can also activate and deactivate the
M Dynamic Mode with the MDM button.

Reactivating MDM

Press the button on the steering wheel or the
MDM button

again; the MDM indicator lamp

goes out.

Activating DSC*

To maintain vehicle stability, drive with
the system activated whenever possi-

ble.

When rocking free or starting off from deep
snow or on loose road surfaces, it can be useful
to briefly deactivate DSC.

Press the DSC OFF button; the DSC indicator
lamp lights up continuously. DSC and MDM are
deactivated.
A message appears on the Control Display.
Please note any supplementary information
that appears there.
Manual transmission

Press and hold the MDM button.
Under unfavorable traction conditions, the
engine output may be briefly reduced even
when DSC is deactivated.

Reactivating DSC

Press the DSC OFF button; the indicator lamp
in the instrument cluster goes out.
You can also activate and deactivate DSC with
the button on the steering wheel, refer to
MDrive on page

Manual transmission

Press the MDM button.

Malfunction in driving stability control
systems

The warning lamp for the brake system
lights up, together with the indicator
lamps for ABS, DSC and Tire Pressure
Monitor or Flat Tire Monitor. A mes-
sage appears on the Control Display.
The driving stability control systems
have failed. Conventional braking effi-
ciency remains available without limita-
tions. While you may continue, you
should remember to proceed cau-

tiously and drive defensively while avoiding full
brake applications. The Tire Pressure Monitor
or the Flat Tire Monitor is also malfunctioning.
Have the system checked as soon as possible.

This manual is related to the following products:

M6 Coupe 2008