beautypg.com

Latch child restraint fixing system – BMW M6 Convertible 2008 User Manual

Page 59

background image

Co

n

tr

o

ls

57

Re

fe

re

n

c

e

At

a

g

la

n

c

e

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

M

o

bi

lity

Unlocking safety belt

1.

Open the belt buckle.

2.

Remove the child restraint system.

3.

Allow the belt webbing to be pulled in com-
pletely.

LATCH child restraint fixing

system

LATCH: Lower Anchor and Tethers for CHil-
dren.

Follow the system manufacturer's
instructions on installation and use of

LATCH child restraint systems in order not to
impair their protective function.

<

Anchor points for LATCH mounts

Before attaching the LATCH child's seat, pull
the belt away from the region of the child
restraint fixing system.

Make sure that both of the lower LATCH
mounts have properly clicked into place

and that the child restraint system is resting
snugly against the backrest. Otherwise, the
protective action may be impeded.

<

Rear seats

The mounting points for the LATCH anchors
are located at the positions indicated by arrows
in the gap between the seat and the backrest.

Coupe: child restraint system with
tether strap

Only use the top tether-strap mounting
points to secure child restraint systems,

otherwise the mounting points could be dam-
aged.

<

There are two additional mounting points for
child restraint systems with a tether strap, refer
to arrows.

Placement of tether strap

Make sure that the tether strap is not
routed over sharp edges and does not

twist on its way to the upper mounting point;
otherwise, the belt may not properly secure the
child restraint system in the event of an acci-
dent.

<

1 Direction of travel
2 Head restraints
3 Tether strap hook
4 Mounting point
5 Rear window shelf/luggage compartment

floor

6 Backrest
7 Tether strap of child restraint system

Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG

This manual is related to the following products: