Settings on the control display, Brightness of control display, Language on the control display, ref – BMW M3 Sedan 2009 User Manual
Page 75
73
Settings on the Control
Display
Language on the Control Display
Setting the language
iDrive, for operating principle refer to page
.
1.
"Settings"
2.
"Language/Units"
3.
"Language:"
4.
Select the desired language.
The setting is stored for the remote control cur-
rently in use.
Setting the voice dialog
Switch between a standard dialog and a short
dialog.
iDrive, for operating principle refer to page
.
1.
"Settings"
2.
"Language/Units"
3.
"Speech mode:"
4.
Select the desired dialog.
The setting is stored for the remote control cur-
rently in use.
Warning signal volume
You can raise or lower the volume of the warn-
ing signals, e.g. the 'fasten safety belt'
reminder, relative to the entertainment sound
output. The warning signals have a fixed mini-
mum and maximum volume that cannot be
dropped below or exceeded.
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Tone"
3.
"Volume settings"
>
"Speed volume": speed-dependent vol-
ume control
>
"PDC": volume of the PDC signal tone
relative to the entertainment sound out-
put
>
"Gong": volume of the signal tone, e.g.
for the 'fasten safety belt' reminder, rela-
tive to the entertainment sound output
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the basic setting.
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Central display"
ba8_E90M3_cic.book Seite 73 Dienstag, 19. August 2008 11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG