BMW M3 Sedan 2009 - Manual (Page 46)

Adjustments
44
Do not use force to swing the lever
back up, otherwise the mechanism
will be damaged. <
MDrive*
With MDrive you can configure several individ-
ual settings for your vehicle on the Control Dis-
play and activate them using the
button on
the steering wheel.
Configuring settings
You can set MDrive on the Control Display
when the ignition is switched on.
iDrive, for operating principle refer to page
16 .
1. "Settings"
2. "MDrive"
The functions contained in MDrive are dis-
played:
> "Drivelogic:"
M dual clutch transmission with Drivel-
ogic: shift modes and Drivelogic drive
programs, refer to page
55
> "EDC:"
Electronic Damper Control EDC
* pro-
grams, refer to page 77
> "DSC:"
Dynamic Stability Control and
M Dynamic Mode, refer to page
76
> "POWER:"
M Engine Dynamics Control programs,
refer to page
58
> "Servotronic:"
Servotronic programs, refer to page
81
> "Shift lights:"
Shift Lights, refer to page
56
3. Select the desired function.
4. Select the desired setting.
"Unchanged" retains the current setting
made outside of MDrive.
The setting is stored for the remote control cur-
rently in use.
Activating the settings
Press the button on the steering wheel.
ba8_E90M3_cic.book Seite 44 Dienstag, 19. August 2008 11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG