Heated seats, Seat and mirror memory, Adjustments – BMW M3 Sedan 2009 User Manual

Page 42

Adjustments

Pull up as far as it will go.

Press the button, arrow

1, tilt the rear seat

backrest slightly forward and pull the head
restraint all the way out.

Only remove the head restraints if no pas-
sengers will be sitting in the rear. Reinstall

head restraints before transporting passengers
in the rear.

Folding head restraints down and back
up

Folding down:
Press the button, arrow

Folding up:
Pull the head restraint.
Depending on the equipment version, it may be
possible to fold down the outer rear head
restraints as well.

Only fold the head restraints down if no
passengers will be sitting in the rear. Fold

up the head restraints before transporting pas-
sengers in the rear.

Heated seats*

Press once for each temperature level.
Three LEDs indicate the highest temperature.

To switch off:
Press button longer.
If you continue driving within approx.
15 minutes, the seat heating is automatically
activated at the previously set temperature.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.

Seat and mirror memory

You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.

Storing

Switch on radio readiness or the ignition,
refer to page

Adjust the seat and exterior mirrors to the
desired positions.

Press the

button.

The LED in the button lights up.

Press the desired memory button

1 or 2: the

LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.

Call-up

Do not call up memory while you are driv-
ing, otherwise unexpected seat move-

ment could result in an accident.

ba8_E90M3_cic.book Seite 40 Dienstag, 19. August 2008 11:51 11