BMW M3 Sedan 2009 - Manual (Page 57)

Co
n
tr
o
ls
55
Refere
nce
At a glan
ce
Dr
ivi
n
g ti
ps
Co
mm
un
icat
io
ns
Navigation
Ente
rt
ai
nme
n
t
M
o
bi
lity
4. Insert the screwdriver into the opening of
the white lever, arrow
1.
5. Pull the screwdriver back all the way, arrow
2. The transmission lock is released.
6. Carefully remove the screwdriver, for exam-
ple to avoid accidentally engaging the
transmission lock during towing.
After parking the vehicle, lock the trans-
mission lock again. Otherwise there is a
danger of the vehicle rolling. <
Locking
1. Insert the screwdriver into the opening of
the white lever and press forward.
The transmission lock is locked again.
2. Fold back the black cover until it engages
audibly.
3. Clip the sleeve of the selector lever back
into place.
Jump-starting and towing, refer to page 212 .
Drivelogic
Various drive programs are available to you via
Drivelogic.
After every change between sequential and
drive mode, the program selected last in each
case is active. Exception: after the first change
from sequential to drive mode, drive program 3
is active.
In drive mode
Five drive programs are available for selection,
from winter program/balanced 1 to sporting and
highly dynamic 5.
In sequential mode
You can choose between six drive programs,
from winter program/balanced 1 to sporty
puristic 6.
Program 6 is available when Dynamic Stability
Control is deactivated, refer to page
76 . If DSC
is activated, the program changes from 6 to 5.
To maintain driving stability, activate DSC
whenever possible.
<
Selecting the drive program via the
button in the center console
Press the button repeatedly until the desired
drive program is displayed in the instrument
cluster, refer to page
54 .
Selecting the drive program via the
button on the steering wheel
You can also activate your preferred drive pro-
gram via the button on the steering wheel,
refer to MDrive on page
44 .
You can set MDrive on the Control Display
when the ignition is switched on.
iDrive, for operating principle refer to page
16 .
1. "Settings"
2. "MDrive"
ba8_E90M3_cic.book Seite 55 Dienstag, 19. August 2008 11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG