BMW Z4 sDrive35i 2010 - Manual (Page 73)

Co
n
tr
o
ls
71
Refere
nce
At a glan
ce
Dr
ivi
n
g ti
ps
Commu
nication
s
Navigation
Ente
rt
ai
nme
n
t
M
o
bi
lity
Entering deadlines for legally required
inspections*
Make sure the date on the Control Display is set
correctly, refer to page
72 ; otherwise, the effec-
tiveness of CBS Condition Based Service is not
ensured.
1. "Vehicle Info"
2. "Vehicle status"
3. "Service required"
4. "§ Vehicle inspection"
5. Open the menu for entering the deadline.
6. "Date:"
7. Create the settings.
8. Press the controller to apply the setting.
The year is highlighted.
9. Turn the controller to make the adjustment.
10. Press the controller to apply the setting.
The date entry is stored.
To exit from the menu:
Move the controller to the left.
More information on the BMW Maintenance
System can be found on page
206 .
Clock
Setting the time
In the instrument cluster
To set the 12h/24h mode, refer to Setting the
time format below.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the time and the word "SET".
2. Press button 2.
3. Use button 1 to set the hours.
4. Press button 2 to confirm the entry.
5. Use button 1 to set the minutes.
6. Press button 2 to confirm the entry.
7. Press button 2.
The system accepts the new time.
Via iDrive
1. Press the button.
The main menu is displayed.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG