beautypg.com

Jointly – BMW Z4 sDrive35i 2010 User Manual

Page 39

background image

Co

n

tr

o

ls

37

Refere

nce

At a glan

ce

Dr

ivi

n

g ti

ps

Commu

nication

s

Navigation

Ente

rt

ai

nme

n

t

M

o

bi

lity

Opening, closing

Individually

>

Press the switch to the resistance point:
The window opens as long as you press the
switch.

>

You can close all windows in the same man-
ner by pulling the switch.
Press the switch beyond the resistance
point:
The window opens automatically. Press
the switch again to stop the opening
movement.

You can close the windows in the same manner
by pulling the switch.

Jointly

>

Press the switch to the resistance point:
All windows open as long as you press the
switch.

>

You can close all windows in the same man-
ner by pulling the switch.
Press the switch beyond the resistance
point:
All windows open automatically. Press
the switch again to stop the opening
movement.

After switching off the ignition

When the remote control is removed or the igni-
tion is switched off, you can still operate the
windows for approx. 1 minute as long as no
door is opened.

Convenient operation

For information on convenient operation via the
remote control or the door lock, refer to page

29

or

31

. For information on Convenient closing

with Comfort Access, refer to Locking
on page

30

.

Pinch protection system

If the closing force exceeds a specific value as
one of the front side windows closes, the win-
dow stops closing and reopens slightly.

Despite the pinch protection system
check and clear the window's travel path

prior to closing it; otherwise, the safety system
might fail to detect certain kinds of obstruc-
tions, such as thin objects, and the window
would continue closing.
Do not install any accessories that might inter-
fere with window movement. Otherwise, the
pinch protection system could be impaired.

<

Closing without pinch protection

If there is an external danger, or if ice on the win-
dows, etc., prevents you from closing the win-
dows normally, proceed as follows:

1.

Pull the switch past the resistance point and
hold it there. Pinch protection is limited and
the window reopens slightly if the closing
force exceeds a certain value.

2.

Pull the switch again past the resistance
point within approx. 4 seconds and hold it
there. The window closes without pinch
protection.

Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG

This manual is related to the following products: