beautypg.com

Washer fluid, Cruise control – BMW X6 M 2011 User Manual

Page 69

background image

Co

n

tr

o

ls

67

Refere

nce

At a glan

ce

Dr

ivi

n

g ti

ps

Co

mm

un

icat

io

ns

Navigation

Ente

rt

ai

nme

n

t

M

o

bi

lity

Do not use washing mechanisms when
the washer fluid reservoir is empty, other-

wise you will damage the washer pump.

<

Washer fluid

Washer fluid antifreeze is flammable. For
this reason, keep it away from ignition

sources and store only in the closed original
container out of reach of children. Otherwise,
there is the danger of bodily injury. Always
observe the instructions for use provided on the
containers.

<

Filler neck for washer fluid

Only add washer fluid with the engine
cooled down to exclude contact with hot

engine components. Otherwise there is a dan-
ger of fire and to personal safety if the fluid is
spilled.

<

All washer nozzles are supplied from one reser-
voir.
Fill with water and – if required – with a washer
antifreeze, according to manufacturer's recom-
mendations.

In order to maintain the mixture ratio, mix
the washer fluid before filling.

<

Capacity

Approx. 6.3 US quarts/6 liters.

Cruise control*

The concept

The cruise control with a braking function is
available for use at speeds of approx. 20 mph/
30 km/h and higher. The vehicle stores and
maintains the speed that you set using the lever
mounted on the steering column. To keep the
specified speed constant, the system brakes if
the engine braking effect is not sufficient on a
downhill grade.

Do not use the cruise control under driv-
ing conditions that do not permit a con-

stant speed, e.g. when driving on winding
roads, in heavy traffic or in poor road conditions
such as snow, rain, ice, and loose road surface.
Otherwise you could lose control of the vehicle
and cause an accident.

<

One lever for all functions

1 Maintaining, storing and increasing the

speed

2 Maintaining, storing and reducing the

speed

3 Interrupting and deactivating the system
4 Resuming stored speed

Maintaining, storing and increasing the
speed

Press the lever to the resistance point, arrow

1:

The system maintains and stores the current
vehicle speed. The display

1 in the speedome-

ter shows the controlled speed, refer to
page

68

.

Each time the lever is pressed, the speed
increases by approx. 1 mph or 1 km/h.

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

This manual is related to the following products: