Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
selected gear is briefly displayed in the instru-
ment panel, followed by the current gear.

Turn signals/headlamp

flasher/high beams

1 High beams
2 Headlamp flasher
3 Turn signals

Using turn signals

Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.

Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb

needs to be replaced.

Signaling briefly

Press lever to resistance point and hold for as
long as you wish to signal.

Triple turn signal activation

Press the lever up to the resistance point. The
turn signal flashes three times.
You can activate or deactivate this function.

"Settings"

"Lighting"

"Triple turn signal"

Triple turn signal activation is activated and

is stored for the remote control currently in use.

Washer/wiper system

1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or

the rain sensor

4 Cleaning windshield and headlamps

This manual is related to the following products:

X5 M 2011