Latch child restraint fixing system – BMW X6 M 2011 User Manual

Page 57

Child seat security

The rear safety belts

BMW X5: all safety belts of the 2nd and
3rd

row seats

BMW X6: all safety belts of the 2nd row
seats

And the safety belt for the front passenger can
be locked to prevent extension in order to per-
mit attachment of child restraint devices.

Locking safety belt

Secure the child restraint device with the
belt.

Pull out the belt webbing completely.

Allow the belt webbing to be pulled in and
pull taut against the child restraint device.
The safety belt is locked.

Unlocking safety belt

Open the belt buckle.

Remove the child restraint device.

Allow the belt webbing to be pulled in com-
pletely.

LATCH child restraint fixing

system

LATCH: Lower Anchor and Tethers for CHil-
dren.

Follow the system manufacturer's
instructions on installation and use of

LATCH child restraint devices; otherwise, their
protective function may be reduced.

Before attaching the child's seat, pull the belt
away from the region of the child restraint fixing
system.

Make sure that the LATCH mounts have
properly clicked into place and that the

child restraint device is resting snugly against
the backrest. Otherwise, the protective action
may be reduced.

The mounts for the LATCH anchors are located
at the points indicated by the arrows.

Child restraint device with tether strap

Only use the top tether mounting points
to secure child restraint devices, other-

wise the mounting points could be damaged.
Do not mount child restraint devices on the
3rd row seats in the BMW X5; otherwise the
protection provided by these child restraint
devices may be reduced.

BMW X5

There are three additional mounting points for
child restraint devices with a tether strap on the
2nd row seats, refer to arrows. Fold out before
using the center mounting point.

This manual is related to the following products:

X5 M 2011