Replacing components – BMW X6 M 2011 User Manual
Page 266
Replacing components
264
Side marker lamps, rear
To replace, please go to a BMW Sports Activity
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Tail lamps
>
Turn signals, brake lamps: 21-watt bulb,
P21W
>
Brake force display: 21-watt bulb, P21W
>
Backup lamp: 16-watt bulb, W16W
>
Rear lamp: LED technology.
In case of a defect, please go to a BMW
Sports Activity Vehicle Center or a work-
shop that works according to BMW repair
procedures with correspondingly trained
personnel.
Arrangement of tail lamps
1 Rear lamp
2 Brake force display
3 Brake lamp
4 Tail lamp/side marker lamp
5 Backup lamp
6 Turn signal
Turn signals, brake lamps and backup
lamps
The bulbs are integrated in a single bulb holder.
1.
Open the side panel in the cargo area.
2.
Remove the first-aid kit
*
and warning trian-
gle
*
if necessary. Fold up the insulation.
3.
Push the button, arrow
1, down, press the
catches, arrows
2, outward slightly and
remove the bulb holder.
4.
P21W bulb:
Apply gentle pressure to the bulb while
turning it to the left, remove the bulb and
replace it.
W16W bulb:
Take out the bulbs and replace them.
5.
Re-engage the bulb holder so that it audibly
clicks into place.
6.
Remount the side panel.
Brake force display
1.
Carefully remove the cover in the liftgate
panel with a screwdriver.
2.
Push the catch on the bulb holder to the left,
arrow, and remove it.
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG