Speed limit – BMW Z4 sDrive35is 2011 User Manual
Page 73
It is accompanied by a text message on the
Control Display.
3.
Push button 1 to check for other messages.
4.
Press button 2.
The display again shows the outside tem‐
perature and the time.
Displaying stored Check Control
messages
1.
Press the button.
2.
"Vehicle Info"
3.
"Vehicle status"
4.
"Check Control"
5.
Select the text message.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you to receive warnings if
you exceed a speed limit in an urban area, for
example. You are only warned of reaching this
speed a second time if your vehicle speed falls
below it again by at least 3 mph/5 km/h.
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Applying your current speed as the
limit
1.
"Settings"
2.
"Speed"
3.
"Select current speed"
4.
Press the controller.
The system adopts your current speed as the
limit.
Activating/deactivating the limit
1.
"Settings"
2.
"Speed"
Seite 73
73
Online Edition for Part no. 01 41 2 604 231 - 03 10 500