beautypg.com

Telephone, At a glance, Pairing/unpairing the mobile phone – BMW Z4 sDrive35is 2011 User Manual

Page 166

background image

Telephone*

At a glance

The concept

After the mobile phone is paired once with the
vehicle, the mobile phone can be operated using
the iDrive, the steering wheel buttons and voice
activation*.
A paired mobile phone is automatically detected
as soon as it is located inside the vehicle, when
the ignition is switched on.
Up to four mobile phones can be paired.

Using the mobile phone while driving
Make entries only when traffic and road

conditions allow. Do not hold the mobile phone
in your hand while you are driving; use the
hands-free system instead. If you do not ob‐
serve this precaution, you can endanger the ve‐
hicle occupants and other road users.◀

Snap-in adapter*

The snap-in adapter is used to:

Hold the mobile phone.

Recharge the battery.

Connect the mobile phone to an outside an‐
tenna of the vehicle.
This provides for better network reception
and consistent sound quality.

Approved mobile phones

Details on which mobile phones with a Blue‐
tooth interface are supported by the mobile
phone preparation package can be obtained at
www.bmw.com/bluetooth.

Displaying the vehicle identification

number and software part number

The vehicle identification number and software
part number are needed to determine which mo‐
bile phones are supported by the mobile phone
preparation package. The software version of
the mobile phone may also be required.

1.

"Telephone"

2.

"Options"

3.

"Bluetooth info"

4.

"Display system information"

These approved mobile phones with a certain
software version, support the vehicle functions
described below.
Malfunctions may occur with other mobile
phones or software versions.
Do not operate a mobile phone that is connected
to the vehicle on the mobile phone keypad, as
this may lead to a malfunction.

Pairing/unpairing the mobile

phone

Requirements

The mobile phone is suitable.

The mobile phone is ready for operation.

Bluetooth is activated on the vehicle, refer to

page 167,

and on the mobile phone.

Bluetooth presettings may need to be made
on the mobile phone, e.g., for a connection
without confirmation or visibility, refer to the
mobile phone operating instructions.

A number with at least four and a maximum
of 16 digits is defined as the Bluetooth pass‐
key. It is only required once for pairing.

The ignition is switched on.

Pairing and connecting

Pairing the mobile phone
To avoid becoming distracted and posing

an unnecessary hazard both to your own vehi‐
cle's occupants and to other road users, only
pair the mobile phone while the vehicle is sta‐
tionary.◀

1.

"Telephone"

2.

"Bluetooth (telephone)"

Seite 166

166

Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Telephone

This manual is related to the following products: