Clock, Date, Check control – BMW 328i Coupe 2011 User Manual
Page 79: Setting the time, refer to, Setting the time, Setting the date
77
Clock
Setting the time
To set the 12h/24h mode, refer to Formats and
units of measure on page
.
1.
Push button
1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the time and the word "SET".
2.
Press button
2.
3.
Use button
1 to set the hours.
4.
Press button
2 to confirm the entry.
5.
Use button
1 to set the minutes.
6.
Press button
2 to confirm the entry.
7.
Press button
2.
The system accepts the new time.
Date
Setting the date
To set the dd/mm or mm/dd date format, refer
to Formats and units of measure on page
1.
Push button
1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the date and the word "SET".
2.
Press button
2.
3.
Use button
1 to set the day of the month.
4.
Press button
2 to confirm the entry.
5.
Set the month and the year in the same way.
6.
Press button
2.
The system stores the new date.
Check Control
The concept
The Check Control monitors vehicle functions
and alerts you to any malfunctions in the sys-
tems monitored. This type of Check Control
message includes indicator and warning lamps
in the instrument cluster and, in some cases, an
acoustic signal.
Indicator and warning lamps can light up in
a variety of combinations and colors.
Several of the lamps are checked for proper
functioning and light up temporarily when the
engine is started or the ignition is switched on.
indicates that Check Control messages have
been stored. These Check Control messages
can be viewed again later, refer to page
Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG