Opening and closing – BMW 328i Coupe 2011 User Manual

Page 36

Opening and closing

Press together the top and bottom parts of
the wind deflector until the catch engages,
arrow

Push the fastening pin, arrow

3, into the

opening provided on the right side of the
vehicle until it snaps into place. Remove the
protective caps beforehand, if necessary.

Push the fastening pin, arrow

4, into the

opening provided on the left side of the
vehicle until it snaps into place.

Turn the rotary handle in the direction of
arrow

5 as far as the first stop to insert the

right fastening pin into the holders.

Turn the rotary handle in the direction of
arrow

6 as far as the

symbol to insert the

left fastening pin into the holders.

Fold up the top section of the wind deflec-
tor.

With the wind deflector installed: do not
recline the front-seat backrests too far if

the seat is to be slid all the way back, as this
would damage the wind deflector.

Only turn the rotary handle within the
range between the two symbols; other-

wise, the cable system inside the wind deflector
could be damaged.

Removing the wind deflector

Proceed in the reverse order as used for instal-
lation.
Protective caps are provided in the vehicle for
the holders of the wind deflector.

Folding

Slide the red release lever towards the middle of
the wind deflector and push the two halves
apart.

Loading function

Cargo can still be loaded on the rear seat of the
vehicle even if the wind deflector has been
installed.

Lower all windows.

Fold down the top section of the wind
deflector, arrow