beautypg.com

Ling function, Climate – BMW 328i Coupe 2011 User Manual

Page 104

background image

Climate

102

Via the button on the steering wheel

You can switch quickly between the recircu-
lated-air mode and the previous mode using a
button

on the steering wheel, refer to page

11

.

ALL program

Press the button.
The current temperature setting
on the driver's side is transferred to
the front passenger side.

If the temperature setting on the driver's side is
changed, the temperature on the front passen-
ger side is changed as well.
The program is switched off when the setting is
adjusted on the front passenger side or the but-
ton is pressed again.

Defrosting windows and removing

condensation

Press the button.
Quickly removes ice and conden-
sation from the windshield and

front side windows.
For this purpose, also switch on the cooling
function.

Switching cooling function on/off

The passenger compartment can only be
cooled while the engine is running.

Press the button.
The air is cooled and dehumidified
and – depending on the tempera-

ture setting – warmed again.
Depending on the weather, the windshield may
fog up briefly when the engine is started.
Pressing the AUTO button automatically
switches on the cooling function.

Rear window defroster

Press the button.
The defroster is switched off auto-
matically after a certain time.

Depending on your vehicle's equipment, the
upper wires serve as an antenna and are not
part of the rear window defroster.

Switching the system on/off

Switching off

With the blower at its lowest
setting, press the left side of the
button to switch off the automatic

climate control.
All displays are cleared except for the rear win-
dow defroster if it is switched on.

The outside air supply is blocked when
the automatic climate control is switched

off. If the air quality deteriorates or the window
fogs over, switch the system back on and
increase the air volume.

<

Switching on

Press any button except the ALL or the rear
window defroster button to reactivate the auto-
matic climate control.

Ventilation

1 Use the thumbwheels to smoothly open

and close the air vents

2 Use the lever to change the direction of the

airflow

3 Thumbwheel for more or less cool air from

the vents for the upper body area

Ventilation for cooling

Adjust the vent outlets to direct the flow of cool
air in your direction, for instance if it has become
too hot in the car.

Draft-free ventilation

Set the vent outlets so that the air flows past
you and not straight at you.

Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG