In order to remove the remote control from the
ignition lock, you must first move the selector
lever to position P and switch off the engine:
interlock. Removing the remote control from
the ignition lock, refer to page

Selector lever positions

P R N D M/S + –

Displays in the instrument cluster

The selector lever position is displayed and, in
manual mode, the engaged gear, e.g. M4.

Changing selector lever positions

With the ignition switched on or the engine
running, the selector lever can be moved
out of position P.

Before moving the lever away from P or N
with the vehicle stationary, first depress the
brake; otherwise, the selector lever will
refuse to move: shiftlock.

To prevent the vehicle from creeping
after you select a driving position,

depress the brake until you are ready to
start.

A lock prevents you from inadvertently engag-
ing selector lever positions R and P. To cancel
the lock, press the button on the front of the
selector lever, see arrow.

P Park

Select this only when the vehicle is stationary.
The rear wheels are locked.

R Reverse

Select this only when the vehicle is stationary.

N Neutral

You can select this in a car wash, for example.
The vehicle can roll.

D Drive, automatic position

Position for normal vehicle operation. All for-
ward gears are selected automatically.
Under normal operating conditions, fuel con-
sumption is lowest when you are driving in posi-
tion D.

Kickdown

Kickdown enables you to achieve maximum
performance.
Press the accelerator pedal beyond the full-
throttle resistance point.