Controls overview, Odometer, outside temperature display, clock, Tachometer – BMW 128i Convertible 2011 User Manual

Page 70

Controls overview

Odometer, outside

temperature display, clock

1 Knob in the instrument cluster
2 Outside temperature and clock
3 Odometer and trip odometer

Knob in the instrument cluster

To reset the trip odometer while the ignition
is switched on

To display the time, outside temperature
and odometer briefly while the ignition is
switched off

Units of measure

To select the respective units of measure, miles
or km for the odometer as well as

7 or 6 for

the outside temperature, refer to Units of mea-
sure on page

The setting is stored for the remote control cur-
rently in use.

Time, outside temperature display

Setting the time, refer to page

Outside temperature warning

When the displayed temperature falls to approx.
+37

7/+36, a signal sounds and a warning

lamp lights up. There is an increased risk of
black ice.

Black ice can also form at temperatures
above +37

7/+36. You should there-

fore drive carefully on bridges and shaded

roads, for example; otherwise, there is an
increased risk of an accident.

Odometer and trip odometer

Resetting the trip odometer:
With the ignition switched on, press button

1 in

the instrument cluster.

When the vehicle is parked

If you still want to view the time, outside tem-
perature and odometer reading briefly after the
remote control has been taken out of the igni-
tion lock:
Press button

1 in the instrument cluster.

Tachometer

Never force the engine speed up into the red
warning field, see arrow. In this range, the fuel
supply is interrupted to protect the engine.