beautypg.com

Heated seats, Seat and mirror memory, Adju stmen ts – BMW 128i Convertible 2011 User Manual

Page 50

background image

Adju

stmen

ts

48

Heated seats*

Press the button once per temperature level.
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx.
15 minutes, the seat heating is automatically
activated at the previously set temperature.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.

Seat and mirror memory*

You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.

Storing

1.

Switch on radio readiness or the ignition,
refer to page

55

.

2.

Adjust the seat and exterior mirrors to the
desired positions.

3.

Press the

button.

The LED in the button lights up.

4.

Press the desired memory button

1 or 2: the

LED goes out.

Call-up

Do not call up the memory while you are
driving; otherwise, unexpected seat

movement could result in an accident.

<

Comfort function

1.

Unlock and open the driver's door or switch
on radio readiness, refer to page

55

.

2.

Briefly press the desired memory button

1

or

2.

The adjusting procedure is halted when you
touch a seat adjustment switch or one of
the memory buttons.

Safety feature

1.

Close the driver's door and switch the igni-
tion on or off, refer to page

55

.

2.

Press the desired memory button

1 or 2

and keep it pressed until the adjustment
process has been completed.

If the

button was pressed accidentally:

Press the button again; the LED goes out.

Call-up with the remote control

The driver's seat position last set is stored for
the remote control currently in use.
You can select whether or not the seat is reset
to that position automatically.

When this Personal Profile function is
used, first make sure that the footwell

behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.

<

The adjusting procedure is halted when you
touch a seat adjustment switch or one of the
memory buttons.

Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG