Dogtra YS300 User Manual

Page 9

1. Open the Battery Charging Receptacle &

Rubber Plug on the No Bark Collar and
connect the Lithium Polymer Charger to the
battery-charging receptacle as shown in the
diagram.

2. Plug the charger into an electrical power outlet

of ordinary household voltage (110V).

3. The Lithium-Polymer Battery provides a

2-hour rapid charge.

TO RECHARGE THE BATTERY

Wall Outlet

110-Volt Charger

TO RECHARGE THE BATTERY

4. When the battery is recharging, the LED will

stay on red. The LED light will become green
when the battery is completely recharged.
(The battery is fully charged with a 2-3 hour
charge.)

Note : Only use the dogtra approved Lithium

Polymer Battery Charger that is designed for
the

dogtra YS300

, or it could potentially

damage the unit.

Charging

Completely recharged.

Indicator Light

(LED Window)

Red

Green

Battery life

On charging