Dogtra YS300 User Manual
Page 6
10
DESCRIPTION
Set the ON-OFF & Intensity Dial on the test
mode (T) to test the .
(See “TESTING THE NO BARK COLLAR”
on page 14.)
NOTICE
When first using the “
dogtra YS300
”, it is
recommended that you start with the lowest level.
If the dog continues to bark, gradually increase
the intensity level.
ON-OFF & Intensity Dial
Function
OFF
Power OFF
P
Vibration only (non-stimulation)
2~7
Vibration followed by stimulation
T
Test mode
Indicator Light (LED window)
The indicator light (LED Window) will flash for
1 second when the Dogtra YS300 has been
turned on. Then after 2 seconds, it will flash
every 2 seconds. If the dog does not bark for over
10 seconds, it will turn to the Sleep mode to save
battery life and the LED will turn off.
Before going into Sleep mode, the LED light
flashes green when the battery is fully charged
and turns to amber when the battery life is getting
low. When the LED indicator emits a blinking
red light, the battery needs to be recharged.
11
DESCRIPTION
Fully charged Medium charge
Needs charge
On Working
Flashes Green Flashes Amber
Flashes Red
On Charging
Stays on Green Stays on Red
Stays on Red
Battery life
LED window