Dogtra iQ Plus - Manual (Page 8)

12 13
1-Dog/2-Dog Selector Switch
The 1-Dog/2-Dog switch is to the left of
the Rheostat Intensity Dial.
I - 1-Dog
Slide the switch to the left underneath “I”,
and press any of the buttons to operate the
1st Receiver/Collar.
II - 2-Dog
Slide the switch to the right underneath “II”,
and press any of the buttons to operate the
2nd Receiver/Collar.
2. How the buttons work
1-Dog switch 2-Dog switch
3. How to fit the receiver/collar on the
dog
7KHUHFHLYHUFROODUVKRXOGEH¿WWHGVRWKDW
the surgical stainless steel contact points
press firmly against the dog’s skin. When
properly fitted, you should be able to fit
a finger or two snugly in between the
contact points and your dog’s skin. When
properly fitted, the receiver/collar should
not move on the dog. The best location for
the receiver/collar box is either side of the
dog’s windpipe.
$ORRVH¿WFDQDOORZWKHUHFHLYHUFROODUWR
move around on the dog’s neck. When this
happens, the contact points may rub the
skin and cause irritation. If the receiver/
collar is too tight, the dogs may have
GLI¿FXOW\EUHDWKLQJ
+RZWR¿WWKHUHFHLYHUFROODURQWKHGRJ