Dogtra iQ Plus - Manual (Page 7)

10 11
To activate the receiver/collar, place the red
dot on the back of the handheld transmitter
to the red dot on the receiver/collar. Hold
the two red dots together for a moment
until the LED light on the receiver/collar
comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots together
momentarily. The LED light will turn red
for a brief moment indicating that the
receiver/collar is now shut off.
The handheld transmitter does not have
an on/off switch, and it will only activate
when buttons are pressed.
1. How to turn on/off the unit
1. How to turn on/off the unit
Understanding your training
system 2. How the buttons work
There are three buttons in front of the
handheld transmitter.
N - Nick button
Nick is a single rapid pulse of electrical
stimulation.
C - Constant button
Constant gives constant stimulation as
long as the button is pushed, for up to 12
seconds. The unit has an automatic shut off
should the button be pressed for more than
12 seconds.
P - Pager button
Pager is a non-stimulating vibration.
2. How the buttons work